1 17

GFC Motorcycle Highlights Mat

GFC Motorcycle Highlights Mat
$385.99
$385.99 $771.98
Oferta Oferta Agotado Agotado
Envío calculado al realizar el pago.

999 en stock

Color: Black
size: (3'x7.8')

MORE THAN FLOOR PROTECTION

GFC Highlight Mats take a traditionally utilitarian garage item and elevate it to be the missing piece of the ultimate bike sanctuary.

BUILT TO BE USED

Tough rubber trim lays flat, prevents slipping, protects the embedded lighting, and is low profile enough to easily park onto.

BRIGHT, CLEAR ILLUMINATION

GFC Highlight Mats use full perimeter 24V, high density SMT LEDs for incredible illumination.

The GFC Motorcycle Highlight Mat rolls out as either a 3'x7.8' (standard size) or 3.4'x8.5' (XL Size) parking surface with a maximum height of .8" off the ground, making it easy to ride on to. 

Choose from 3 insert materials:

Wood Vinyl: 2mm thick and highly durable, this material is easy to clean, chemical resistant, and best suited for areas of high traffic. 

Gray Stone Vinyl: Same material properties as the Wood Vinyl, but with a tougher industrial look. 

Black Showroom Carpet: The ultimate choice for a clean, high end showroom. 

Product Specification

Flexible embedded full perimeter edge lighting:

●       24V SMT LED

●       6000K

●       >90CRI

●       12W/m

Standard size (overall): 40.5”W x 97”L

XL size (overall): 48”W x 104”L

Weight: 20-25lbs.

Packaging:

  • Standard size box dimensions: 14”W x 14”H x 41”L
  • XL size box dimensions: 14”W x 14”H x 48”L

Included in box:

  1. Highlight Mat
  2. 24V power supply for standard 110 wall outlet
  3.  instruction / care maintenance sheet

Ver detalles completos

SHIPS ROLLED

  • No assembly required
  • Reduces shelf space-Stackable in packaging-Installs in seconds
  • Portability for event


SPECIFICATIONS

  • Standard motorcycle sizes 3’x7.8’ or 3.4’x8.5’
  • 24VDC SMT LED lighting
  • Plugs into standard 110 wall outlet
  • Optional battery power available

MAT CARE AND MAINTENANCE
CLEANING
STORAGE


HIGHLIGHT MAT CARE AND MAINTENANCE


*Failure to follow these guidelines may result in permanent damage to your Highlight Mat. Please review.

INSTALLATION


Roll out onto a flat and clean surface. Allow 15-30min for the mat to lay flat without any waves or bumps,
longer wait times may be necessary in cold environments. Plug into the provided power supply with the inline
dimmer switch, or use without the dimmer for continuous full brightness.

USAGE


Never use a power supply or battery other than what has been supplied with the highlight mat. If any part feels
excessively hot to the touch, unplug immediately and contact support.
DO NOT drive over the corner caps, always drive straight on to the mat.
DO NOT lower a car or motorcycle with air ride or other adjustable suspension onto the mat while hot, as doing
so will result in a melted mat.
Carefully plug and unplug the connector at the mat, forcibly pulling or pushing the connector may result in
damage to the wiring.
Avoid placing wheel stands or other support devices on the illuminated edge trim.

—
CLEANING Carpet:

Use a manual push carpet cleaner or vacuum on a low to medium setting for periodic cleaning. For stains or
spills, use a compatible spot cleaner spray and brush.

DO NOT use carpet shampoo machines or similar. For cleaning the illuminated edge trim, use a microfiber
cloth with mild soap and water if needed.

Vinyl:


Use mild soap and water or degreaser spray with a microfiber towel to clean the surfaces. For cleaning the
illuminated edge trim, use a microfiber cloth with mild soap and water if needed.

STORAGE


It is best to avoid storing the Highlight Mat for extended periods of time. When storage is needed, carefully roll
up the mat with the inside diameter being no tighter than 8” to avoid damage.


DO NOT stack heavy objects or other mats on top of the Highlight Mat. NEVER fold the mat.


Always store and transport the Highlight Mat horizontally on its side, and avoid standing it in a vertical position
when rolled.

INSERT MATERIALS

  • Black cut pile showroom carpet
  • 2mm vinyl LVP wood pa ern
  • 2mm vinyl LVP stone pa ern
  • Printed graphical
  • lightweight moto mat

LIGHTING

  • 8mm width exible SMT LED strips (x4)
  • 24V DC
  • <100W total power consumption
  • 4000K, 5000K, 6000K white options
  • Silicone sleeved

PACKAGING

  • 45”L x 15”H x 15”W box
  • 8” diameter internal support tubes
  • Power supply included

POWER SUPPLY

  • Input: 100264 VAC 50/60Hz
  • Output: 24VDC
  • 150W
  • RoHS, EAC, CE
  • ta/tc: 45°C - 70°C


BATTERY (OPTIONAL)

  • 30 Ah 24V
  • Built in BMS
  • PC / ABS closure
  • Barrel plug input / output

  • Fast Shipping 2-3 Days

  • Easy 10 Day Return

  • AI-Driven Sustainable Fits

  • Size Inclusive up to 3X, No Cap.